157
edits
Changes
Jump to navigation
Jump to search
Line 19:
Line 19: + + + + + + Line 36:
Line 42: + + + + + + + + + + + + + − +
no edit summary
==Project context==
==Project context==
On July 27, 2019 [[SSI-90]] had demonstrated the viability of an in-house manufactured polyethylene envelope for standard-scale payloads. However, due to the mechanisms of that launch, no data on the ascent characteristics, equilibrium altitude, and descent characteristics of a zero-pressure profiles were obtained, thus failing to fulfill one of the major objectives of that flight. Thus, it was immediately decided that a repeat launch would be attempted, with nearly the exact same configurations, except for the addition of a SPOT Trace and strengthening of RockBlock connections. Since a repeat build would require little additional design work, it was decided that the repeat launch would be attempted on the evening of '''August 6, 2019''' from Pigeon Point.
As simulations from Pigeon Point showed the trajectory heading northeast over the Bay Area, it was decided on July 30 to request permission to launch from Garin Regional Park in Hayward, CA instead. That same day, avionics work began and was concluded on August 1. Due to the anticipated short duration of the flight, it was decided to reduce the power bank from 18 to 9 batteries. On July 31, the launch was moved to '''August 5, 2019''', and on August 2 the new launch site was rejected.
The construction of the ZPB and final payload assembly occurred on August 4. It was generally agreed that the quality of the balloon was inferior to that of the first attempt due to several reasons.
==Configuration==
==Configuration==
[[File:ssi91traj.png|400px|thumb|Mission trajectory]]
[[File:ssi91traj.png|400px|thumb|Mission trajectory]]
[[File:ssi91launch.png|400px|thumb|left|Balloon ascending after release]]
[[File:ssi91launch.png|400px|thumb|left|Balloon ascending after release]]
[[File:Ssi91profile.png|400px|thumb|right|Mission profile]]
Inflation was eventful thanks to strong ground winds from due west. The envelope ruptured midway through filling and was patched before refilling. Additionally, a hole approximately 5 mm in diameter was patched.
'''August 5 2011 PDT:''' Balloon released from a running start. Initial motion to the east at an ascent rate of 3.8 m/s --- significantly faster than the target ascent rate of 2.5 m/s.
'''August 5 2059 PDT:''' After almost an hour of steady ascent, balloon reaches a maximum altitude of 10.298 km over (37.1502, -121.4077). Ascent rate had fluctuated above and below the initial rate of 3.8 m/s. In theory, a slight acceleration in ascent was expected. By this time the balloon was in the jet stream layer travelling north at nearly 30 m/s.
'''August 5 2103 PDT:''' Balloon reported an altitude of 10.291 km, a highly unexpected measurement. In retrospect, it is believed that venting began at this altitude, but the vent hole was far too small to vent the necessary volume, leading to envelope rupture.
'''August 5 2055 PDT:''' Balloon reported first definitive descent at an altitude of 9.905 km.
'''August 5 2213 PDT:''' After an hour of descent at 2.5 m/s - 3.0 m/s, balloon reported a ground elevation of 29 km. The landing site was less than 100 m from a road in an apple orchard.
'''August 5 20:11 PDT:'''
'''August 9 0316 PDT:''' Last RockBlock transmission received, with no indication of movement since flight termination.
{{balloon-footer}}
{{balloon-footer}}
[[Category: High Altitude Balloons]][[Category: Balloon Launches]]
[[Category: High Altitude Balloons]][[Category: Balloon Launches]]