Difference between revisions of "Medusa"

From Stanford SSI Wiki
Jump to navigation Jump to search
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{TechSidebar
+
{{HABEES-sidebar
 
| header = Medusa
 
| header = Medusa
 
| img link = File:Medusa.jpg
 
| img link = File:Medusa.jpg
 
| designer = Kirill Safin
 
| designer = Kirill Safin
| techline = Balloons Core Avionics Expansion
+
| techline = Balloons Core Peripherals
 
| version = Generation I
 
| version = Generation I
 
| name = Medusa
 
| name = Medusa
| missions = None
 
 
}}
 
}}
  
'''Medusa''' is a HABEES developed expansion board for the Balloons Core Avionics. Medusa is designed to accept five 40-pin edge-cards to support a variety of add-on functionalities to enhance the capabilities of the Core Avionics suite.  
+
'''Medusa''' is a HABEES-developed expansion board for the Balloons Core Avionics. Medusa is designed to accept five 40-pin edge-cards to support a variety of add-on functionalities to enhance the capabilities of the Core Avionics suite.  
  
 
Medusa consists of five board-locking 80 pin edge-card slots, a micro SD for data logging, a Teensy 3.2 MCU, power input, and a CAN transceiver.  
 
Medusa consists of five board-locking 80 pin edge-card slots, a micro SD for data logging, a Teensy 3.2 MCU, power input, and a CAN transceiver.  
Line 146: Line 145:
 
| SCLK
 
| SCLK
 
|-
 
|-
| 14
+
| 14 (CS)
 
| 21
 
| 21
 
| 20  
 
| 20  
Line 167: Line 166:
 
| SDA
 
| SDA
 
|-
 
|-
| 17
+
| 17 (PWM)
 
| NC
 
| NC
 
| NC  
 
| NC  
Line 174: Line 173:
 
| 5  
 
| 5  
 
|-
 
|-
| 18
+
| 18 (PWM)
 
| NC
 
| NC
 
| NC  
 
| NC  
Line 181: Line 180:
 
| 6
 
| 6
 
|-
 
|-
| 19
+
| 19 (PWM)
 
| 23
 
| 23
 
| 5  
 
| 5  
Line 188: Line 187:
 
| 23
 
| 23
 
|-
 
|-
| 20
+
| 20 (PWM)
 
| 22
 
| 22
 
| 6
 
| 6
Line 195: Line 194:
 
| 22
 
| 22
 
|-
 
|-
| 21
+
| 21 (PWM)
 
| NC
 
| NC
 
| NC
 
| NC
Line 202: Line 201:
 
| 32
 
| 32
 
|-
 
|-
| 22
+
| 22 (PWM)
 
| NC
 
| NC
 
| NC
 
| NC
Line 209: Line 208:
 
| 25
 
| 25
 
|-
 
|-
| 23
+
| 23 (A)
 
| NC
 
| NC
 
| NC  
 
| NC  
Line 216: Line 215:
 
| 16
 
| 16
 
|-
 
|-
| 24
+
| 24 (A)
 
| NC
 
| NC
 
| NC  
 
| NC  
Line 223: Line 222:
 
| 17
 
| 17
 
|-
 
|-
| 25
+
| 25 (A)
 
| NC
 
| NC
 
| NC  
 
| NC  
Line 230: Line 229:
 
| A10
 
| A10
 
|-
 
|-
| 26
+
| 26 (A)
 
| NC
 
| NC
 
| NC  
 
| NC  
Line 237: Line 236:
 
| A11
 
| A11
 
|-
 
|-
| 27
+
| 27 (A)
 
| A12
 
| A12
 
| 16
 
| 16
Line 244: Line 243:
 
| A12
 
| A12
 
|-
 
|-
| 28
+
| 28 (A)
 
| A13
 
| A13
 
| 17
 
| 17
Line 251: Line 250:
 
| A13
 
| A13
 
|-
 
|-
| 29
+
| 29 (A)
 
| A14
 
| A14
 
| A10
 
| A10
Line 258: Line 257:
 
| A14
 
| A14
 
|-
 
|-
| 30
+
| 30 (A)
 
| 30
 
| 30
 
| A11
 
| A11
Line 265: Line 264:
 
| 30
 
| 30
 
|-
 
|-
| 31
+
| 31 (A)
 
| NC
 
| NC
 
| NC  
 
| NC  
Line 272: Line 271:
 
| 29
 
| 29
 
|-
 
|-
| 32
+
| 32 (A)
 
| NC
 
| NC
 
| NC  
 
| NC  
Line 279: Line 278:
 
| 28
 
| 28
 
|-
 
|-
| 33
+
| 33 (A)
 
| NC
 
| NC
 
| NC  
 
| NC  
Line 286: Line 285:
 
| 27
 
| 27
 
|-
 
|-
| 34
+
| 34 (A)
 
| NC
 
| NC
 
| NC  
 
| NC  
Line 335: Line 334:
 
| GND
 
| GND
 
|}
 
|}
 +
 +
[[Category: High Altitude Balloons]][[Category: HABEES]]

Latest revision as of 23:21, 23 August 2017

Medusa
Part of the HABEES series
Medusa.jpg
Chief Designer Kirill Safin
Technology Line Balloons Core Peripherals
Version Generation I
Name Medusa
General
HONEY Standards Venom Breakout Fang Breakout Board Naming
Core Architecture
Gen 1 Architecture HONEY
Core Avionics
Oscar Cookie Monster Elmo The Count
Core Power
Apple Turnover Biscuit
Core Peripherals
Medusa Cobra Viper QueenBee ProtoBee
Core Radio
Macaw
Test & Prototype
QueenBee
Guides
Making a HONEY Board Using STINGR Using QueenBee Making a Prototype
VE

Medusa is a HABEES-developed expansion board for the Balloons Core Avionics. Medusa is designed to accept five 40-pin edge-cards to support a variety of add-on functionalities to enhance the capabilities of the Core Avionics suite.

Medusa consists of five board-locking 80 pin edge-card slots, a micro SD for data logging, a Teensy 3.2 MCU, power input, and a CAN transceiver.

Medusa functions by providing appropriate power & signal buses to all card slots, allowing external boards to implement I2C, SPI, UART, Analog, PWM functionalities to perform meaningful operations. Medusa receives commands from the Core Avionics over CAN, and is able to transmit data back to the Core Avionics along CAN as well. It is capable of logging all raw readings from installed cards locally, and transmitting only necessary or otherwise processed data back to the avionics.

Design

Medusa is partitioned into five total slots -- three of which are standard slots, and two of which are god slots. Standard slots partition various pins to reduce or eliminate any conflicts among simultaneously installed cards. God Slots provide access to all Teensy pins that are broken out to the slots.

Each card slot is provided: +5V, +3.3V, +VBAT, GND, I2C, SPI with a unique chip select pin, and a card-detect LED.

Each of the standard slots partition a subset of pins and protocols. Each of the standard slots is provided a Hardware Serial line; Slot 1 utilizes Hardware Serial 1, Slot 2 uses Hardware Serial 2, and so on. They also partition a subset of the PWM and ANALOG pins broken out by the Teensy. All Standard slots have two PWM pins, located on pins 37/38 and 39/40. Each standard slot also has four ANALOG pins, located on pins 53/54, 55/56, 57/58, and 59/60.

Slot 1 uses PWM 3/4 and ANALOG 5/6/7/8, Slot 2 uses PWM 1/2 and ANALOG 1/2/3/4, while Slot 3 uses PWM 5/6 and ANALOG 9/10/11/12. This is enumerated on the breakout manifest found on the PCB silkscreen.

The God Slots, however, break out all of these pins. That is, the God Slots have access to PWM 1-6 and ANALOG 1-12. The God Slots should only be used under two conditions: one is the necessity for a large number of ANALOG or PWM pins (more than a standard slot provides), and two being the need for four total cards, with the standard three slots being already taken up. In any case, it is critical for slots to be chosen wisely to avoid conflicts between cards.

God Slots also have the option of using Serial -- however, they utilize Software Serial, and only if enabled using the SS jumpers found on the left of each of the slots. Slot 4 uses Analog pins 1 & 12 for Serial, while Slot 5 uses Analog pins 2 & 11.

All cards should include a trace from pin 71 to pin 72 to enable the on-board medusa card-detect LED.

Schematics

All Medusa Schematics, as well as the PCB Layout, can be found below.

Pinouts

Pin Slot 1 Slot 2 Slot 3 Slot 4 Slot 5
1 +5V +5V +5V +5V +5V
2 +5V +5V +5V +5V +5V
3 +3.3V +3.3V +3.3V +3.3V +3.3V
4 +3.3V +3.3V +3.3V +3.3V +3.3V
5 +VBAT +VBAT +VBAT +VBAT +VBAT
6 +VBAT +VBAT +VBAT +VBAT +VBAT
7 GND GND GND GND GND
8 GND GND GND GND GND
9 RX1 RX2 RX3 A12 (SSE) A11 (SSE)
10 TX1 TX2 TX3 A1 (SSE) A2 (SSE)
11 MOSI MOSI MOSI MOSI MOSI
12 MISO MISO MISO MISO MISO
13 SCLK SCLK SCLK SCLK SCLK
14 (CS) 21 20 24 33 26
15 SCL SCL SCL SCL SCL
16 SDA SDA SDA SDA SDA
17 (PWM) NC NC NC 5 5
18 (PWM) NC NC NC 6 6
19 (PWM) 23 5 32 23 23
20 (PWM) 22 6 25 22 22
21 (PWM) NC NC NC 32 32
22 (PWM) NC NC NC 25 25
23 (A) NC NC NC 16 16
24 (A) NC NC NC 17 17
25 (A) NC NC NC A10 A10
26 (A) NC NC NC A11 A11
27 (A) A12 16 29 A12 A12
28 (A) A13 17 28 A13 A13
29 (A) A14 A10 27 A14 A14
30 (A) 30 A11 14 30 30
31 (A) NC NC NC 29 29
32 (A) NC NC NC 28 28
33 (A) NC NC NC 27 27
34 (A) NC NC NC 14 14
35 +3.3V +3.3V +3.3V +3.3V +3.3V
36 CD CD CD CD CD
37 +5V +5V +5V +5V +5V
38 +5V +5V +5V +5V +5V
39 GND GND GND GND GND
40 GND GND GND GND GND